Multi-line 2 ASC Application Software series 4.x
Multi-line 2 ASC Application Software series 4.x
You have chosen to download our software.
Within a few seconds, you will receive an email containing a download link.
Having trouble using the software? Please contact support@deif.com.
Best regards,
DEIF A/S
The software is subject to copyright DEIF A/S
By following the above mentioned link and downloading the file you automatically accept DEIF A/S copyright and license agreement (EULA). The license agreement can be found on www.deif.com/software
- ASC-4 Battery - Automatic Sustainable Controller
- ASC-4 Solar - Automatic sustainable controller
- ASC-4 Battery Standalone - Automatic sustainable controller
4.27.2
PM compatibility version 1.33.0
Corrections:
• Corrected issue where multiple batteries would not share the allowed charging power when peak shaving charging limit is used.
• Switch from AUTO to SEMI on another device could cause a breaker to open and stop in rare cases.
• Fixed an issue where PV protocol for Canadian CSI 3PH did not start correctly.
4.27.2 |
01/03/2024 |
PM compatibility version 1.33.0 Corrections:
|
4.27.0 |
19/12/2023 |
PM compatibility version 1.33.0 New features:• Added support for using CAT EMCP 4 controllers directly as power meter.
Changes:• Updated the Ausar ESS protocol to make more data available and acknowledge faults in the system when the "ESS shutdown" alarm is acknowledged.
Corrections.• Split the "Secure Elite XXX" power meter into two protocols: "Secure Elite 100/300" and "Secure Elite 440/500". This was done to correct a power scaling issue. |
4.26.1 |
26/10/2023 |
PM compatibility version 1.30.0
Corrections
|
4.26.0 |
10/07/2023 |
PM compatibility version 1.30.0 New features
Changes
Corrections
|
4.25.0 |
09/02/2023 |
PM compatibility version 1.29.0 New features:
Changes:
Corrections:
|
4.24.0 |
24/11/2022 |
PM compatibility version 1.28.0 New features:
Changes:
Corrections:
|
4.23.1 |
15/09/2022 |
PM compatibility version 1.25.0 Corrections:
|
4.23.0 |
31/08/2022 |
PM compatibility version 1.25.0 New features:
Changes:
Corrections:
|
4.22.0 |
03/05/2022 |
PM compatibility version 1.25.0 New features:
Changes:
Corrections:
|
4.21.0 |
18/02/2022 |
PM compatibility version 1.25.0 New features: Changes: |
4.20.0 |
09/12/2021 |
PM compatibility version 1.24.2 New features:1- Sungrow LC100 BCU protocol added. Changes:1- Renamed "Ginlong Solis" PV protocol to "Solis (Ginlong)". |
4.19.0 |
22/11/2021 |
PM compatibility version 1.24.2 New features:
Changes:
Corrections:
|
4.18.0 |
20/09/2021 |
PM compatibility version 1.24.1 New features:
Changes:
Corrections:
|
4.17.1 |
16/07/2021 |
PM compatibility version 1.24.1. Corrections:1- Corrected that the EVVO PV protocol did not send control telegrams to control the active power of the inverter. |
4.17.0 |
28/06/2021 |
PM compatibility version 1.24.1. New features:
Changes:
Corrections:
|
4.16.0 |
08/04/2021 |
PM compatibility version 1.23.0. New features:
Changes:
Corrections:
|
4.15.1 |
25/02/2021 |
PM compatibility version 1.22.0. Corrections:
|
4.15.0 |
30/11/2020 |
PM compatibility version 1.22.0. New features:
|
4-14-2 |
29/10/2020 |
PM compatibility version 1.20.0 Corrections:
|
4.12.0 |
19/03/2020 |
PM compatibility version 1.16.0. New features:
|
4.11.3 |
28/01/2020 |
PM compatibility version 1.16.0 Corrections:
|
4.11.2 |
24/01/2020 |
PM compatibility version 1.16.0 Corrections:
|
4.11.1 |
31/10/2019 |
PM compatibility version 1.16.0. Corrections:
|
4.11.0 |
11/12/2018 |
PM compatibility version 1.16.0 New features:
Corrections:
|
4.10.1 |
16/04/2018 |
Corrections:
|
4.10.0 |
20/03/2018 |
PM compatibility version 1.16.0 New features:
Corrections:
|
4.05.2 |
12/01/2018 |
Corrections:
|
4.05.1 |
02/01/2018 |
PM compatibility version 1.15.0
|
4.05.0 |
30/11/2017 |
PM compatibility version 1.15.0 New features:
Corrections:
Changes:
|
4.04.0 |
05/10/2017 |
PM compatibility version 1.15.0 New features:1- Support of HiQ inverter. |
4.03.1 |
09/05/2017 |
PM compatibility version 1.15.0 Corrections:
|
4.03.0 |
03/04/2017 |
Version 4.03.0 New features:
Changes:
Corrections:
|
4.02.0 |
21/12/2016 |
PM compatibility version 1.15.0 New features:
Changes:
Corrections:
|
Como sempre, recomendamos a instalação dos aprimoramentos oferecidos para que você possa desfrutar totalmente do seu produto DEIF.
Todos os softwares aprimorados podem ser baixados, à sua conveniência e de maneira gratuita pelo site www.deif.com sob a opção “Software” e, em seguida, “Software Download”.
Em caso de dúvidas ou se enfrentar problemas para encontrar o software relevante para o seu produto, fique à vontade para contatar a DEIF A/S pelo telefone + 45 96149614 ou no escritório local da DEIF. Como alternativa, você pode enviar um e-mail para support@deif.com. Estamos sempre prontos para ajudar!